A modern home needs to be constructed with energy consumption and its carbon footprint in mind. The best way to accomplish this is to slowly transition the home into one that’s powered by solar panels. It’s both more eco-friendly and less wasteful in the long run, but it requires you to make a few initial investments.
It’s imperative that you also install a system for storing solar energy since it can only be used intermittently based on how much sunlight days your roof is exposed to, and that way you’ll use the full potential of this alternative energy source. Luckily, solar batteries have improved greatly in recent years.
Before you can even start the proper preparation for installing the panels you’ll need to figure out how much energy your home consumes. It’s relatively easy to figure out because you pay your energy bills based on how much energy you consume each month.
Electricity consumption varies throughout the year so if you’re using this metric you should take into account bills from different seasons. Have in mind that your house and household may expand in the years to come as well.
Assess your solar potential
The main disadvantage of this energy source is the fact that you can’t use it to its full potential at all times. That’s why you should figure out how many sunny days your home has throughout the year and when you won’t be able to use the solar panel system at all.
If the there’s a variance in the amount of sunlight you get, you should consider installing a large battery and keeping your home on the electric grid as well, so you can switch between the two.
As is the case with any large home remodeling project, you’ll need to take into account the cost of the transition and the installation of the panels. For instance, installing a 5kw solar system in Sydney is the most reasonable way to go. It’s manageable for an average family and it provides enough electricity for such a household as well.
Another consideration to be made is the fact that both Sydney local authorities and the federal government offer tax rebates for those who make this change. Together with the savings on electrical bills, this practically means that the panels pay for themselves.
At one point, the only option to was to buy the solar panels and the proper equipment and to start using it and wait until the benefits kick in in the form of savings. This is no longer the case, and there are numerous ways to utilize solar energy systems.
For instance, there’s an option of leasing the solar panels. This way, you own the energy produced from the panels but not the panels themselves. Another way to go is to buy shared panels, which will be used by the neighborhood if the conditions allow. This gives you a chance to share the costs as well.
Make the most of the energy
Installing the panels is not a small expense and once you decide to do it, you should take full advantage of the energy you’ve bought. Older homes especially lose a lot of their energy on bad insulation. This is something that should be fixed before you install the panels.
The most vulnerable areas are usually around the doors and windows since that’s where you lose most of your heat. At the same time, it might be useful to replace old appliances that waste too much energy.
Before you introduce solar energy to your home, you’ll need to make a few adjustments and take into account a few considerations about your home and needs in terms of energy consumption. This will let you make the most of the energy.